Unknown Key Share Attacks on uses of Transport Layer Security with the Session Description Protocol (SDP)Mozillamartin.thomson@gmail.comMozillaekr@rftm.comUnknown key-share attacks on the use of Datagram Transport Layer Security for
the Secure Real-Time Transport Protocol (DTLS-SRTP) and its use with Web
Real-Time Communications (WebRTC) identity assertions are described. Simple
mitigation techniques are defined.The use of Transport Layer Security (TLS) with the Session
Description Protocol (SDP) is defined in . Further use
with Datagram Transport Layer Security (DTLS) and the Secure
Real-time Transport Protocol (SRTP) is defined as DTLS-SRTP
.In these specifications, key agreement is performed using TLS or DTLS, with
authentication being tied back to the session description (or SDP) through the
use of certificate fingerprints. Communication peers check that a hash, or
fingerprint, provided in the SDP matches the certificate that is used in the TLS
or DTLS handshake. This is defined in .The design in RFC 4572 relies on the integrity of the signaling channel.
Certificate fingerprints are assumed to be provided by the communicating peers
and carried by the signaling channel without being subject to modification.
However, this design is vulnerable to an unknown key-share (UKS) attack where a
misbehaving endpoint is able to advertise a key that it does not control. This
leads to the creation of sessions where peers are confused about the identify of
the participants.An extension to TLS is defined that can be used to mitigate this attack.A similar attack is possible with sessions that use WebRTC identity (see Section
5.6 of ). This issue and a mitigation for it
is discussed in more detail in .In an unknown key-share attack , a malicious participant in a protocol
claims to control a key that is in reality controlled by some other actor. This
arises when the identity associated with a key is not properly bound to the key.In usages of TLS and DTLS that use SDP for negotiation, an endpoint is able to
acquire the certificate fingerprint another entity. By advertising that
fingerprint in place of one of its own, the malicious endpoint can cause its
peer to communicate with a different peer, even though it believes that it is
communicating with the malicious endpoint.When the identity of communicating peers is established by higher-layer
signaling constructs, such as those in SIP or WebRTC
, this allows an attacker to bind their own
identity to a session with any other entity.By substituting the the fingerprint of one peer for its own, an attacker is able
to cause a session to be established where one endpoint has an incorrect value
for the identity of its peer. However, the peer does not suffer any such
confusion, resulting in each peer involved in the session having a different
view of the nature of the session.This attack applies to any communications established based on the SDP
fingerprint attribute .This vulnerability can be used by an attacker to create a session where there is
confusion about the communicating endpoints.A SIP endpoint or WebRTC endpoint that is configured to reuse a certificate can
be attacked if it is willing to conduct two concurrent calls, one of which is
with an attacker. The attacker can arrange for the victim to incorrectly
believe that is calling the attacker when it is in fact calling a second party.
The second party correctly believes that it is talking to the victim.In a related attack, a single call using WebRTC identity can be attacked so that
it produces the same outcome. This attack does not require a concurrent call.The use of TLS with SDP depends on the integrity of session signaling. Assuming
signaling integrity limits the capabilities of an attacker in several ways. In
particular:An attacker can only modify the parts of the session signaling for a session
that they are part of, which is limited to their own offers and answers.No entity will complete communications with a peer unless they are willing to
participate in a session with that peer.The combination of these two constraints make the spectrum of possible attacks
quite limited. An attacker is only able to switch its own certificate
fingerprint for a valid certificate that is acceptable to its peer. Attacks
therefore rely on joining two separate sessions into a single session.The second condition is not necessary with WebRTC identity if the victim has or
is configured with a target peer identity (this is defined in ).
Furthermore, any identity displayed by a browser could be different to the
identity used by the application, since the attack affects the browser’s
understanding of the peer’s identity.In this example, two outgoing sessions are created by the same endpoint. One of
those sessions is initiated with the attacker, another session is created toward
another honest endpoint. The attacker convinces the endpoint that their session
has completed, and that the session with the other endpoint has succeeded.In this case, Norma is willing to conduct two concurrent sessions. The first
session is established with Mallory, who falsely uses Patsy’s certificate
fingerprint. A second session is initiated between Norma and Patsy. Signaling
for both sessions is permitted to complete.Once complete, the session that is ostensibly between Mallory and Norma is
completed by forwarding packets between Norma and Patsy. This requires that
Mallory is able to intercept DTLS and media packets from Patsy so that they can
be forwarded to Norma at the transport addresses that Norma associates with the
first session.The second session - between Norma and Patsy - is permitted to continue to the
point where Patsy believes that it has succeeded. This ensures that Patsy
believes that she is communicating with Norma. In the end, Norma believes that
she is communicating with Mallory, when she is actually communicating with
Patsy.Though Patsy needs to believe that the second session is successful, Mallory has
no real interest in seeing that session complete. Mallory only needs to ensure
that Patsy does not abandon the session prematurely. For this reason, it might
be necessary to permit the answer from Patsy to reach Norma to allow Patsy to
receive a call completion signal, such as a SIP ACK. Once the second session
completes, Mallory causes any DTLS packets sent by Norma to Patsy to be dropped.For the attacked session to be sustained beyond the point that Norma detects
errors in the second session, Mallory also needs to block any signaling that
Norma might send to Patsy asking for the call to be abandoned. Otherwise, Patsy
might receive a notice that the call is failed and thereby abort the call.This attack creates an asymmetry in the beliefs about the identity of peers.
However, this attack is only possible if the victim (Norma) is willing to
conduct two sessions concurrently, and if the same certificate - and therefore
SDP fingerprint attribute value - is used in both sessions.Systems that use key continuity might be able to detect an unknown key-share
attack if a session with the actual peer (i.e., Patsy in the example) was
established in the past. Whether this is possible depends on how key continuity
is implemented.Implementations that maintain a single database of identities with an index on
peer keys could discover that the identity saved for the peer key does not match
the claimed identity. Such an implementation could notice the disparity between
the actual keys (Patsy) and the expected keys (Mallory).In comparison, implementations that first match based on peer identity could
treat an unknown key-share attack as though their peer had used a
newly-configured device. The apparent addition of a new device could generate
user-visible notices (e.g., “Mallory appears to have a new device”). However,
such an event is not always considered alarming; some implementations might
silently save a new key.An attack on DTLS-SRTP is possible because the identity of peers involved is not
established prior to establishing the call. Endpoints use certificate
fingerprints as a proxy for authentication, but as long as fingerprints are used
in multiple calls, they are vulnerable to attacks of the sort described.The solution to this problem is to assign a new identifier to communicating
peers. Each endpoint assigns their peer a unique identifier during call
signaling. The peer echoes that identifier in the TLS handshake, binding that
identity into the session. Including this new identity in the TLS handshake
means that it will be covered by the TLS Finished message, which is necessary to
authenticate it (see ). Validating that peers use the correct
identifier then means that the session is established between the correct two
endpoints.This solution relies on the unique identifier given to DTLS sessions using the
SDP tls-id attribute . This field is already
required to be unique. Thus, no two offers or answers from the same client will
have the same value.A new sdp_tls_id extension is added to the TLS or DTLS handshake for
connections that are established as part of the same call or real-time session.
This carries the value of the tls-id attribute and provides integrity
protection for its exchange as part of the TLS or DTLS handshake.The sdp_tls_id TLS extension carries the unique identifier that an endpoint
selects. The value includes the tls-id attribute from the SDP that the
endpoint generated when negotiating the session.The extension_data for the sdp_tls_id extension contains a SdpTlsId
struct, described below using the syntax defined in :The tls_id field of the extension includes the value of the tls-id SDP
attribute as defined in (that is, the
tls-id-value ABNF production). The value of the tls-id attribute is encoded
using ASCII .Where RTP and RTCP are not multiplexed, it is possible that the two
separate DTLS connections carrying RTP and RTCP can be switched. This is
considered benign since these protocols are usually distinguishable. RTP/RTCP
multiplexing is advised to address this problem.The sdp_tls_id extension is included in a ClientHello and either ServerHello
(for TLS and DTLS versions less than 1.3) or EncryptedExtensions (for TLS 1.3).
In TLS 1.3, the sdp_tls_id extension MUST NOT be included in a ServerHello.Endpoints MUST check that the tls_id parameter in the extension that they
receive includes the tls-id attribute value that they received in their peer’s
session description. Comparison can be performed with either the decoded ASCII
string or the encoded octets. An endpoint that receives a sdp_tls_id
extension that is not identical to the value that it expects MUST abort the
connection with a fatal handshake_failure alert.An endpoint that is communicating with a peer that does not support this
extension will receive a ClientHello, ServerHello or EncryptedExtensions that
does not include this extension. An endpoint MAY choose to continue a session
without this extension in order to interoperate with peers that do not implement
this specification.In TLS 1.3, the sdp_tls_id extension MUST be sent in the EncryptedExtensions
message.The identity assertion used for WebRTC is
bound only to the certificate fingerprint of an endpoint and can therefore be
copied by an attacker along with any SDP fingerprint attributes.The problem is compounded by the fact that an identity provider is not required
to verify that the entity requesting an identity assertion controls the keys.
Nor is it currently able to perform this validation. This is not an issue
because verification is not a necessary condition for a secure protocol, nor
would it be sufficient as established in .A simple solution to this problem is suggested by . The identity of
endpoints is included under a message authentication code (MAC) during the
cryptographic handshake. Endpoints are then expected to validate that their
peer has provided an identity that matches their expectations.In TLS, the Finished message provides a MAC over the entire handshake, so that
including the identity in a TLS extension is sufficient to implement this
solution. Rather than include a complete identity assertion - which could be
sizeable - a collision-resistant hash of the identity assertion is included in a
TLS extension. Peers then need only validate that the extension contains a hash
of the identity assertion they received in signaling in addition to validating
the identity assertion.Endpoints MAY use the sdp_tls_id extension in addition to this so that two
calls between the same parties can’t be altered by an attacker.The webrtc_id_hash TLS extension carries a hash of the identity assertion that
communicating peers have exchanged.The extension_data for the webrtc_id_hash extension contains a
WebrtcIdentityHash struct, described below using the syntax defined in
:A WebRTC identity assertion is provided as a JSON object that is
encoded into a JSON text. The resulting string is then encoded using UTF-8
. The content of the webrtc_id_hash extension are produced by
hashing the resulting octets with SHA-256 . This produces the 32
octets of the assertion_hash parameter, which is the sole contents of the
extension.The SDP identity attribute includes the base64 encoding of the
same octets that were input to the hash. The webrtc_id_hash extension is
validated by performing base64 decoding on the value of the SDP identity
attribute, hashing the resulting octets using SHA-256, and comparing the results
with the content of the extension.Identity assertions might be provided by only one peer. An endpoint that does
not produce an identity assertion MUST generate an empty webrtc_id_hash
extension in its ClientHello. This allows its peer to include a hash of its
identity assertion. An endpoint without an identity assertion MUST omit the
webrtc_id_hash extension from its ServerHello or EncryptedExtensions message.A peer that receives a webrtc_id_hash extension that is not equal to the value
of the identity assertion from its peer MUST immediately fail the TLS handshake
with an error. This includes cases where the identity attribute is not
present in the SDP.A webrtc_id_hash extension that is any length other than 0 or 32 is invalid
and MUST cause the receiving endpoint to generate a fatal decode_error alert.A peer that receives an identity assertion, but does not receive a
webrtc_id_hash extension MAY choose to fail the connection, though it is
expected that implementations that were written prior to the existence of this
document will not support these extensions for some time.In TLS 1.3, the webrtc_id_hash extension MUST be sent in the
EncryptedExtensions message.Use of session identifiers does not prevent an attacker from establishing two
concurrent sessions with different peers and forwarding signaling from those
peers to each other. Concatenating two signaling sessions creates a situation
where both peers believe that they are talking to the attacker when they are
talking to each other.Session concatention is possible at higher layers: an attacker can establish two
independent sessions and simply forward any data it receives from one into the
other. This kind of attack is prevented by systems that enable peer
authentication such as WebRTC identity or
SIP identity .In the absence of any higher-level concept of peer identity, the use of session
identifiers does not prevent session concatenation. The value to an attacker is
limited unless information from the TLS connection is extracted and used with
the signaling. For instance, a key exporter might be used to
create a shared secret or unique identifier that is used in a secondary
protocol.If a secondary protocol uses the signaling channel with the assumption that the
signaling and TLS peers are the same then that protocol is vulnerable to attack.
The identity of the peer at the TLS layer is not guaranteed to be the same as
the identity of the signaling peer.It is important to note that multiple connections can be created within the same
signaling session. An attacker might concatenate only part of a session,
choosing to terminate some connections (and optionally forward data) while
arranging to have peers interact directly for other connections. It is even
possible to have different peers interact for each connection. This means that
the actual identity of the peer for one connection might differ from the peer on
another connection.Information extracted from a TLS connection therefore MUST NOT be used in a
secondary protocol outside of that connection if that protocol relies on the
signaling protocol having the same peers. Similarly, data from one TLS
connection MUST NOT be used in other TLS connections even if they are
established as a result of the same signaling session.This entire document contains security considerations.This document registers two extensions in the TLS “ExtensionType Values” registry
established in :The sdp_tls_id extension has been assigned a code point of TBD; it is
recommended and is marked as “Encrypted” in TLS 1.3.The webrtc_id_hash extension has been assigned a code point of TBD; it is
recommended and is marked as “Encrypted” in TLS 1.3.NIST FIPS 180-2, Secure Hash StandardThe Transport Layer Security (TLS) Protocol Version 1.2This document specifies Version 1.2 of the Transport Layer Security (TLS) protocol. The TLS protocol provides communications security over the Internet. The protocol allows client/server applications to communicate in a way that is designed to prevent eavesdropping, tampering, or message forgery. [STANDARDS-TRACK]SDP: Session Description ProtocolThis memo defines the Session Description Protocol (SDP). SDP is intended for describing multimedia sessions for the purposes of session announcement, session invitation, and other forms of multimedia session initiation. [STANDARDS-TRACK]Connection-Oriented Media Transport over the Transport Layer Security (TLS) Protocol in the Session Description Protocol (SDP)This document specifies how to establish secure connection-oriented media transport sessions over the Transport Layer Security (TLS) protocol using the Session Description Protocol (SDP). It defines a new SDP protocol identifier, 'TCP/TLS'. It also defines the syntax and semantics for an SDP 'fingerprint' attribute that identifies the certificate that will be presented for the TLS session. This mechanism allows media transport over TLS connections to be established securely, so long as the integrity of session descriptions is assured.This document extends and updates RFC 4145. [STANDARDS-TRACK]Datagram Transport Layer Security Version 1.2This document specifies version 1.2 of the Datagram Transport Layer Security (DTLS) protocol. The DTLS protocol provides communications privacy for datagram protocols. The protocol allows client/server applications to communicate in a way that is designed to prevent eavesdropping, tampering, or message forgery. The DTLS protocol is based on the Transport Layer Security (TLS) protocol and provides equivalent security guarantees. Datagram semantics of the underlying transport are preserved by the DTLS protocol. This document updates DTLS 1.0 to work with TLS version 1.2. [STANDARDS-TRACK]The Secure Real-time Transport Protocol (SRTP)This document describes the Secure Real-time Transport Protocol (SRTP), a profile of the Real-time Transport Protocol (RTP), which can provide confidentiality, message authentication, and replay protection to the RTP traffic and to the control traffic for RTP, the Real-time Transport Control Protocol (RTCP). [STANDARDS-TRACK]Framework for Establishing a Secure Real-time Transport Protocol (SRTP) Security Context Using Datagram Transport Layer Security (DTLS)This document specifies how to use the Session Initiation Protocol (SIP) to establish a Secure Real-time Transport Protocol (SRTP) security context using the Datagram Transport Layer Security (DTLS) protocol. It describes a mechanism of transporting a fingerprint attribute in the Session Description Protocol (SDP) that identifies the key that will be presented during the DTLS handshake. The key exchange travels along the media path as opposed to the signaling path. The SIP Identity mechanism can be used to protect the integrity of the fingerprint attribute from modification by intermediate proxies. [STANDARDS-TRACK]WebRTC Security ArchitectureThe Real-Time Communications on the Web (RTCWEB) working group is tasked with standardizing protocols for enabling real-time communications within user-agents using web technologies (commonly called "WebRTC"). This document defines the security architecture for WebRTC.Using the SDP Offer/Answer Mechanism for DTLSThis document defines the SDP offer/answer procedures for negotiating and establishing a DTLS association. The document also defines the criteria for when a new DTLS association must be established. The document updates RFC 5763 and RFC 7345, by replacing common SDP offer/answer procedures with a reference to this specification. This document defines a new SDP media-level attribute, 'tls-id'. This document also defines how the 'tls-id' attribute can be used for negotiating and establishing a TLS connection, in conjunction with the procedures in RFC 4145 and RFC 8122.ASCII format for network interchangeUTF-8, a transformation format of ISO 10646ISO/IEC 10646-1 defines a large character set called the Universal Character Set (UCS) which encompasses most of the world's writing systems. The originally proposed encodings of the UCS, however, were not compatible with many current applications and protocols, and this has led to the development of UTF-8, the object of this memo. UTF-8 has the characteristic of preserving the full US-ASCII range, providing compatibility with file systems, parsers and other software that rely on US-ASCII values but are transparent to other values. This memo obsoletes and replaces RFC 2279.Unknown Key-Share Attacks on the Station-to-Station (STS) ProtocolSIGMA: The ‘SIGn-and-MAc’approach to authenticated Diffie-Hellman and its use in the IKE protocolsWebRTC 1.0: Real-time Communication Between BrowsersEnhancements for Authenticated Identity Management in the Session Initiation Protocol (SIP)The existing security mechanisms in the Session Initiation Protocol (SIP) are inadequate for cryptographically assuring the identity of the end users that originate SIP requests, especially in an interdomain context. This document defines a mechanism for securely identifying originators of SIP messages. It does so by defining two new SIP header fields, Identity, for conveying a signature used for validating the identity, and Identity-Info, for conveying a reference to the certificate of the signer. [STANDARDS-TRACK]RTP: A Transport Protocol for Real-Time ApplicationsThis memorandum describes RTP, the real-time transport protocol. RTP provides end-to-end network transport functions suitable for applications transmitting real-time data, such as audio, video or simulation data, over multicast or unicast network services. RTP does not address resource reservation and does not guarantee quality-of- service for real-time services. The data transport is augmented by a control protocol (RTCP) to allow monitoring of the data delivery in a manner scalable to large multicast networks, and to provide minimal control and identification functionality. RTP and RTCP are designed to be independent of the underlying transport and network layers. The protocol supports the use of RTP-level translators and mixers. Most of the text in this memorandum is identical to RFC 1889 which it obsoletes. There are no changes in the packet formats on the wire, only changes to the rules and algorithms governing how the protocol is used. The biggest change is an enhancement to the scalable timer algorithm for calculating when to send RTCP packets in order to minimize transmission in excess of the intended rate when many participants join a session simultaneously. [STANDARDS-TRACK]The JavaScript Object Notation (JSON) Data Interchange FormatJavaScript Object Notation (JSON) is a lightweight, text-based, language-independent data interchange format. It was derived from the ECMAScript Programming Language Standard. JSON defines a small set of formatting rules for the portable representation of structured data.This document removes inconsistencies with other specifications of JSON, repairs specification errors, and offers experience-based interoperability guidance.The Base16, Base32, and Base64 Data EncodingsThis document describes the commonly used base 64, base 32, and base 16 encoding schemes. It also discusses the use of line-feeds in encoded data, use of padding in encoded data, use of non-alphabet characters in encoded data, use of different encoding alphabets, and canonical encodings. [STANDARDS-TRACK]Keying Material Exporters for Transport Layer Security (TLS)A number of protocols wish to leverage Transport Layer Security (TLS) to perform key establishment but then use some of the keying material for their own purposes. This document describes a general mechanism for allowing that. [STANDARDS-TRACK]This problem would not have been discovered if it weren’t for discussions with
Sam Scott, Hugo Krawczyk, and Richard Barnes. A solution similar to the one
presented here was first proposed by Karthik Bhargavan who provided valuable
input on this document. Thyla van der Merwe assisted with a formal model of the
solution. Adam Roach and Paul E. Jones provided useful review and input.