Microsoft

mbj@microsoft.com http://self-issued.info/

Sweden erik@wahlstromstekniska.se

Spotify AB

Birger Jarlsgatan 61, 4tr Stockholm 113 56 Sweden +46702691499 erdtman@spotify.com

ARM Ltd.

6060 Hall in Tirol Austria Hannes.Tschofenig@arm.com

Security ACE Working Group Internet-Draft JSON Web Token JWT Claims CBOR COSE OAuth ACE CBOR Web Token (CWT) is a compact means of representing claims to be transferred between two parties. The claims in a CWT are encoded in the Concise Binary Object Representation (CBOR) and CBOR Object Signing and Encryption (COSE) is used for added application layer security protection. A claim is a piece of information asserted about a subject and is represented as a name/value pair consisting of a claim name and a claim value. CWT is derived from JSON Web Token (JWT), but uses CBOR rather than JSON.

The JSON Web Token (JWT) is a standardized security token format that has found use in OAuth 2.0 and OpenID Connect deployments, among other applications. JWT uses JSON Web Signature (JWS) and JSON Web Encryption (JWE) to secure the contents of the JWT, which is a set of claims represented in JSON. The use of JSON for encoding information is popular for Web and native applications, but it is considered inefficient for some Internet of Things (IoT) systems that use low power radio technologies. An alternative encoding of claims is defined in this document. Instead of using JSON, as provided by JWTs, this specification uses CBOR and calls this new structure "CBOR Web Token (CWT)", which is a compact means of representing secured claims to be transferred between two parties. CWT is closely related to JWT. It references the JWT claims and both its name and pronunciation are derived from JWT. To protect the claims contained in CWTs, the CBOR Object Signing and Encryption (COSE) specification is used. The suggested pronunciation of CWT is the same as the English word "cot".

In JSON, maps are called objects and only have one kind of map key: a string. In COSE, we use strings, negative integers, and unsigned integers as map keys. The integers are used for compactness of encoding and easy comparison. The inclusion of strings allows for an additional range of short encoded values to be used as well.

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in "Key words for use in RFCs to Indicate Requirement Levels" . This document reuses terminology from JWT and COSE . The "StringOrURI" term has the same meaning, syntax, and processing rules as the "StringOrUri" term defined in Section 2 of JWT , except that it uses a CBOR text string instead of a JSON string value. The "NumericDate" term has the same meaning, syntax, and processing rules as the "NumericDate" term defined in Section 2 of JWT , except that the CBOR numeric date representation (from Section 2.4.1 of ) is used. The encoding is modified so that the leading tag (6.1 or 0xC1) MUST be omitted. The key used to identify a claim value. A CBOR map that contains the claims conveyed by the CWT.

The set of claims that a CWT must contain to be considered valid is context dependent and is outside the scope of this specification. Specific applications of CWTs will require implementations to understand and process some claims in particular ways. However, in the absence of such requirements, all claims that are not understood by implementations MUST be ignored. To keep CWTs as small as possible, the CBOR encoded claim keys are represented using integers or text strings. summarizes all keys used to identify the claims defined in this document.

None of the claims defined below are intended to be mandatory to use or implement. They rather provide a starting point for a set of useful, interoperable claims. Applications using CWTs should define which specific claims they use and when they are required or optional.

The iss (issuer) claim has the same meaning, syntax, and processing rules as the iss claim defined in Section 4.1.1 of JWT , except that the format MUST be a StringOrURI. The CBOR encoded claim key 1 MUST be used to identify this claim.

The sub (subject) claim has the same meaning, syntax, and processing rules as the sub claim defined in Section 4.1.2 of JWT , except that the format MUST be a StringOrURI. The CBOR encoded claim key 2 MUST be used to identify this claim.

The aud (audience) claim has the same meaning, syntax, and processing rules as the aud claim defined in Section 4.1.3 of JWT , except that the format MUST be a StringOrURI. The CBOR encoded claim key 3 MUST be used to identify this claim.

The exp (expiration time) claim has the same meaning, syntax, and processing rules as the exp claim defined in Section 4.1.4 of JWT , except that the format MUST be a NumericDate. The CBOR encoded claim key 4 MUST be used to identify this claim.

The nbf (not before) claim has the same meaning, syntax, and processing rules as the nbf claim defined in Section 4.1.5 of JWT , except that the format MUST be a NumericDate. The CBOR encoded claim key 5 MUST be used to identify this claim.

The iat (issued at) claim has the same meaning, syntax, and processing rules as the iat claim defined in Section 4.1.6 of JWT , except that the format MUST be a NumericDate. The CBOR encoded claim key 6 MUST be used to identify this claim.

The cti (CWT ID) claim has the same meaning, syntax, and processing rules as the jti claim defined in Section 4.1.7 of JWT , except that the format MUST be binary string. The CBOR encoded claim key 7 MUST be used to identify this claim.

The claim values defined in this specification MUST NOT be prefixed with any CBOR tag. For instance, while CBOR tag 6.1 (seconds-since-the-epoch) could logically be prefixed to values of the exp, nbf, and iat claims, this is unnecessary, since the representation of the claim values is already specified by the claim definitions. Tagging claim values would only take up extra space without adding information. However, this does not prohibit future claim definitions from requiring the use of CBOR tags for those specific claims.

How to determine that a CBOR data structure is a CWT is application-dependent. In some cases, this information is known from the application context, such as from the position of the CWT in a data structure at which the value must be a CWT. One method of indicating that a CBOR object is a CWT is the use of the "application/cwt" content type by a transport protocol. This section defines the CWT CBOR tag as another means for applications to declare that a CBOR data structure is a CWT. Its use is optional, and is intended for use in cases in which this information would not otherwise be known. If present, the CWT tag MUST prefix a tagged object using one of the COSE CBOR tags. In this example, the COSE_Mac0 tag is used. The actual COSE_Mac0 object has been excluded from this example.

To create a CWT, the following steps are performed. The order of the steps is not significant in cases where there are no dependencies between the inputs and outputs of the steps. Create a CWT Claims Set containing the desired claims. Let the Message be the binary representation of the CWT Claims Set. Create a COSE Header containing the desired set of Header Parameters. The COSE Header MUST be valid per the specification. Depending upon whether the CWT is signed, MACed, or encrypted, there are three cases: If the CWT is signed, create a COSE_Sign/COSE_Sign1 object using the Message as the COSE_Sign/COSE_Sign1 Payload; all steps specified in for creating a COSE_Sign/COSE_Sign1 object MUST be followed. Else, if the CWT is MACed, create a COSE_Mac/COSE_Mac0 object using the Message as the COSE_Mac/COSE_Mac0 Payload; all steps specified in for creating a COSE_Mac/COSE_Mac0 object MUST be followed. Else, if the CWT is a COSE_Encrypt/COSE_Encrypt0 object, create a COSE_Encrypt/COSE_Encrypt0 using the Message as the plaintext for the COSE_Encrypt/COSE_Encrypt0 object; all steps specified in for creating a COSE_Encrypt/COSE_Encrypt0 object MUST be followed. If a nested signing, MACing, or encryption operation will be performed, let the Message be the COSE_Sign/COSE_Sign1, COSE_Mac/COSE_Mac0, or COSE_Encrypt/COSE_Encrypt0, add the matching COSE CBOR tag, and return to Step 3. If needed by the application, add the appropriate COSE CBOR tag to the COSE object to indicate the type of the COSE object. If needed by the application, add the CWT CBOR tag to indicate that the COSE object is a CWT.

When validating a CWT, the following steps are performed. The order of the steps is not significant in cases where there are no dependencies between the inputs and outputs of the steps. If any of the listed steps fail, then the CWT MUST be rejected -- that is, treated by the application as invalid input. Verify that the CWT is a valid CBOR object. If the object begins with the CWT CBOR tag, remove it and verify that one of the COSE CBOR tags follows it. If the object is tagged with one of the COSE CBOR tags, remove it and use it to determine the type of the CWT, COSE_Sign/COSE_Sign1, COSE_Mac/COSE_Mac0, or COSE_Encrypt/COSE_Encrypt0. If the object does not have a COSE CBOR tag, the COSE message type is determined from the application context. Verify that the resulting COSE Header includes only parameters and values whose syntax and semantics are both understood and supported or that are specified as being ignored when not understood. Depending upon whether the CWT is a signed, MACed, or encrypted, there are three cases: If the CWT is a COSE_Sign/COSE_Sign1, follow the steps specified in Section 4 (Signing Objects) for validating a COSE_Sign/COSE_Sign1 object. Let the Message be the COSE_Sign/COSE_Sign1 payload. Else, if the CWT is a COSE_Mac/COSE_Mac0, follow the steps specified in Section 6 (MAC Objects) for validating a COSE_Mac/COSE_Mac0 object. Let the Message be the COSE_Mac/COSE_Mac0 payload. Else, if the CWT is a COSE_Encrypt/COSE_Encrypt0 object, follow the steps specified in Section 5 (Encryption Objects) for validating a COSE_Encrypt/COSE_Encrypt0 object. Let the Message be the resulting plaintext. If the Message begins with a COSE CBOR tag, then the Message is a CWT that was the subject of nested signing, MACing, or encryption operations. In this case, return to Step 1, using the Message as the CWT. Verify that the Message is a valid CBOR object; let the CWT Claims Set be this CBOR object.

The security of the CWT relies upon on the protections offered by COSE. Unless the claims in a CWT are protected, an adversary can modify, add, or remove claims. Since the claims conveyed in a CWT may be used to make authorization decisions, it is not only important to protect the CWT in transit but also to ensure that the recipient can authenticate the party that assembled the claims and created the CWT. Without trust of the recipient in the party that created the CWT, no sensible authorization decision can be made. Furthermore, the creator of the CWT needs to carefully evaluate each claim value prior to including it in the CWT so that the recipient can be assured of the validity of the information provided. While syntactically, the signing and encryption operations for Nested CWTs may be applied in any order, if both signing and encryption are necessary, normally producers should sign the message and then encrypt the result (thus encrypting the signature). This prevents attacks in which the signature is stripped, leaving just an encrypted message, as well as providing privacy for the signer. Furthermore, signatures over encrypted text are not considered valid in many jurisdictions.

This section establishes the IANA "CBOR Web Token (CWT) Claims" registry. Values are registered on a Specification Required basis after a three-week review period on the cwt-reg-review@ietf.org mailing list, on the advice of one or more Designated Experts. However, to allow for the allocation of values prior to publication, the Designated Experts may approve registration once they are satisfied that such a specification will be published. [[ Note to the RFC Editor: The name of the mailing list should be determined in consultation with the IESG and IANA. Suggested name: cwt-reg-review@ietf.org. ]] Registration requests sent to the mailing list for review should use an appropriate subject (e.g., "Request to register claim: example"). Registration requests that are undetermined for a period longer than 21 days can be brought to the IESG's attention (using the iesg@ietf.org mailing list) for resolution. Criteria that should be applied by the Designated Experts includes determining whether the proposed registration duplicates existing functionality, whether it is likely to be of general applicability or whether it is useful only for a single application, and whether the registration description is clear. It is suggested that multiple Designated Experts be appointed who are able to represent the perspectives of different applications using this specification in order to enable broadly informed review of registration decisions. In cases where a registration decision could be perceived as creating a conflict of interest for a particular Expert, that Expert should defer to the judgment of the other Experts.

The human-readable name requested (e.g., "iss"). Brief description of the claim (e.g., "Issuer"). Claim Name of the equivalent JWT claim, as registered in . CWT claims should normally have a corresponding JWT claim. If a corresponding JWT claim would not make sense, the Designated Experts can choose to accept registrations for which the JWT Claim Name is listed as "N/A". Integer values between -256 and 255 and strings of length 1 are designated as Standards Track Document required. Integer values from -65536 to 65535 and strings of length 2 are designated as Specification Required. Integer values of greater than 65535 and strings of length greater than 2 are designated as expert review. Integer values less than -65536 are marked as private use. CBOR major type and optional tag for the claim. For Standards Track RFCs, list the "IESG". For others, give the name of the responsible party. Other details (e.g., postal address, email address, home page URI) may also be included. Reference to the document or documents that specify the parameter, preferably including URIs that can be used to retrieve copies of the documents. An indication of the relevant sections may also be included but is not required.

Claim Name: N/A Claim Description: This registration reserves the key value 0. JWT Claim Name: N/A CBOR Key Value: 0 CBOR Major Type: N/A Change Controller: IESG Specification Document(s): [[ this specification ]] Claim Name: iss Claim Description: Issuer JWT Claim Name: iss CBOR Key Value: 1 CBOR Major Type: 3 Change Controller: IESG Specification Document(s): of [[ this specification ]] Claim Name: sub Claim Description: Subject JWT Claim Name: sub CBOR Key Value: 2 CBOR Major Type: 3 Change Controller: IESG Specification Document(s): of [[ this specification ]] Claim Name: aud Claim Description: Audience JWT Claim Name: aud CBOR Key Value: 3 CBOR Major Type: 3 Change Controller: IESG Specification Document(s): of [[ this specification ]] Claim Name: exp Claim Description: Expiration Time JWT Claim Name: exp CBOR Key Value: 4 CBOR Major Type: 0, 1, or 7 with subtypes 25, 26, or 27 Change Controller: IESG Specification Document(s): of [[ this specification ]] Claim Name: nbf Claim Description: Not Before JWT Claim Name: nbf CBOR Key Value: 5 CBOR Major Type: 0, 1, or 7 with subtypes 25, 26, or 27 Change Controller: IESG Specification Document(s): of [[ this specification ]] Claim Name: iat Claim Description: Issued At JWT Claim Name: iat CBOR Key Value: 6 CBOR Major Type: 0, 1, or 7 with subtypes 25, 26, or 27 Change Controller: IESG Specification Document(s): of [[ this specification ]] Claim Name: cti Claim Description: CWT ID JWT Claim Name: jti CBOR Key Value: 7 CBOR Major Type: 2 Change Controller: IESG Specification Document(s): of [[ this specification ]]

This section registers the application/cwt media type in the "Media Types" registry in the manner described in RFC 6838, which can be used to indicate that the content is a CWT.

Type name: application Subtype name: cwt Required parameters: N/A Optional parameters: N/A Encoding considerations: binary Security considerations: See the Security Considerations section of [[ this specification ]] Interoperability considerations: N/A Published specification: [[ this specification ]] Applications that use this media type: IoT applications sending security tokens over HTTP(S) and other transports. Fragment identifier considerations: N/A Additional information: Magic number(s): N/A File extension(s): N/A Macintosh file type code(s): N/A Person & email address to contact for further information: IESG, iesg@ietf.org Intended usage: COMMON Restrictions on usage: none Author: Michael B. Jones, mbj@microsoft.com Change controller: IESG Provisional registration? No

This section registers the CoAP Content-Format ID for the "application/cwt" media type in the "CoAP Content-Formats" registry .

Media Type: application/cwt Encoding: - Id: TBD (maybe 61) Reference: [[ this specification ]]

This section registers the CWT CBOR tag in the "CBOR Tags" registry .

CBOR Tag: TBD (maybe 61 to use the same value as the Content-Format) Data Item: CBOR Web Token (CWT) Semantics: CBOR Web Token (CWT), as defined in [[ this specification ]] Reference: [[ this specification ]] Point of Contact: Michael B. Jones, mbj@microsoft.com

IANA IANA IANA IANA

This appendix includes a set of CWT examples that show how the CWT Claims Set can be protected. There are examples that are signed, MACed, encrypted, and that use nested signing and encryption. To make the examples easier to read, they are presented both as hex strings and in the extended CBOR diagnostic notation described in Section 6 of .

The CWT Claims Set used for the different examples displays usage of all the defined claims. For signed and MACed examples, the CWT Claims Set is the CBOR encoding as a binary string.

This section contains the keys used to sign, MAC, and encrypt the messages in this appendix. Line breaks are for display purposes only.

This section shows a signed CWT with a single recipient and a full CWT Claims Set. The signature is generated using the private key listed in and it can be validated using the public key from . Line breaks are for display purposes only.

This section shows a MACed CWT with a single recipient, a full CWT Claims Set, and a CWT tag. The MAC is generated using the 256-bit symmetric key from with a 64-bit truncation. Line breaks are for display purposes only.

This section shows an encrypted CWT with a single recipient and a full CWT Claims Set. The encryption is done with AES-CCM mode using the 128-bit symmetric key from with a 64-bit tag and 13-byte nonce, i.e., COSE AES-CCM-16-64-128. Line breaks are for display purposes only.

This section shows a Nested CWT, signed and then encrypted, with a single recipient and a full CWT Claims Set. The signature is generated using the private ECDSA key from and it can be validated using the public ECDSA parts from . The encryption is done with AES-CCM mode using the 128-bit symmetric key from with a 64-bit tag and 13-byte nonce, i.e., COSE AES-CCM-16-64-128. The content type is set to CWT to indicate that there are multiple layers of COSE protection before finding the CWT Claims Set. The decrypted ciphertext will be a COSE_sign1 structure. In this example, it is the same one as in , i.e., a Signed CWT Claims Set. Note that there is no limitation to the number of layers; this is an example with two layers. Line breaks are for display purposes only.

This section shows a MACed CWT with a single recipient and a simple CWT Claims Set. The CWT Claims Set with a floating-point 'iat' value. The MAC is generated using the 256-bit symmetric key from with a 64-bit truncation. Line breaks are for display purposes only.

This specification is based on JSON Web Token (JWT) , the authors of which also include Nat Sakimura and John Bradley. It also incorporates suggestions made by many people, notably Carsten Bormann, Jim Schaad, Ludwig Seitz, and Göran Selander.

[[ to be removed by the RFC Editor before publication as an RFC ]] -05 Addressed working group last call comments with the following changes: Say that CWT is derived from JWT, rather than CWT is a profile of JWT. Used CBOR type names in descriptions, rather than major/minor type numbers. Clarified the NumericDate and StringOrURI descriptions. Changed to allow CWT claim names to use values of any legal CBOR map key type. Changed to use the CWT tag to identify nested CWTs instead of the CWT content type. Added an example using a floating-point date value. Acknowledged reviewers. -04 Specified that the use of CBOR tags to prefix any of the claim values defined in this specification is NOT RECOMMENDED. -03 Reworked the examples to include signed, MACed, encrypted, and nested CWTs. Defined the CWT CBOR tag and explained its usage. -02 Added IANA registration for the application/cwt media type. Clarified the nested CWT language. Corrected nits identified by Ludwig Seitz. -01 Added IANA registration for CWT Claims. Added IANA registration for the application/cwt CoAP content-format type. Added Samuel Erdtman as an editor. Changed Erik's e-mail address. -00 Created the initial working group version based on draft-wahlstroem-ace-cbor-web-token-00.